Thermal paper rolls are widely used in a range of industries. They’re frequently found in point-of-sale printers, ATMs, and kiosks.
Thermal paper is composed of a special fine paper coated with chemicals that change color when heated. This ensures the paper stays smudge-free and resistant to abrasion.
Core size
Thermal paper rolls come in various core sizes. To determine the ideal fit for your Point-of-Sale printer, measure both its outside and inside diameters.
The core size is critical as it determines whether your printer’s roll will fit into its spindle hole or not, especially for eftpos terminals and receipt printers.
When measuring the core size of thermal paper rolls, use a ruler for accuracy. Hold it side to side and align its edge with the paper’s edge.
The core size of the paper is measured in pounds and points, which measure its thickness. Generally speaking, thicker sheets weigh more due to the added weight from a precoat layer.
Width
The width of thermal paper rolls varies according to the printer they will be used in. Some printers require wider rolls, while others call for thinner ones. Therefore, it’s essential to measure both core size and length before purchasing any rolls.
To determine a roll’s width, measure across the end going directly through the center spindle hole (core). To do this accurately, stand the roll upright so it cannot move or roll around.
Once you know the width of a roll, our printable register roll sizing guide can help you select one suitable for your machine. Doing this helps avoid getting an incorrect roll or receiving too many receipts on one.
Thickness
Thermal paper rolls come in various sizes to fit different POS printers. Before you purchase any size paper roll, be sure to verify its compatibility with your printer specifications.
When selecting thermal paper, thickness is another important factor to take into account. It will determine both its quality and cost.
Thermal paper thickness is measured in mils or 1/10th of an inch. However, this measurement can vary depending on the grammage, paper type, and coatings applied.
Thermal paper typically comes in thicker sheets, offering greater durability but using fewer rolls per roll due to less waste material.
The paper’s weight and coatings will also impact its image stability. When stored at temperatures exceeding 140 degrees Fahrenheit, it is essential to select a paper with high image stability and low static sensitivity. Doing this will guarantee that thermal prints remain legible for years to come. thermal paper rolls in Jeddah
Paper type
Thermal paper is a commonly used receipt paper for point-of-sale (POS) printers, cash registers, and credit card terminals. This allows businesses to produce high-definition prints without the need for ink cartridges or ribbons.
Thermal printer paper has a special coating that allows heat from a thermal printer to print images onto the paper. Furthermore, this protective layer shields it from UV rays, water damage, and oil spots.
The thickness of thermal paper rolls is an important factor that influences their performance. Thinner rolls may be easier to write on, but they have a shorter life span and lower durability compared to thicker ones.
If you plan to store your receipts for an extended period, use thermal paper that is resistant to moisture and other elements that can destroy it. Otherwise, the print on your receipts may become faded over time.
To determine the ideal fit for your Point-of-Sale printer, measure both its outside and inside diameters.
The core size is critical as it determines whether your printer’s roll will fit into its spindle hole or not, especially for eftpos terminals and receipt printers.
When measuring the core size of thermal paper rolls, use a ruler for accuracy. Hold it side to side and align its edge with the paper’s edge.
To determine the ideal fit for your Point-of-Sale printer, measure both its outside and inside diameters.
The core size is critical as it determines whether your printer’s roll will fit into its spindle hole or not, especially for eftpos terminals and receipt printers.
When measuring the core size of rolls, use a ruler for accuracy. Hold it side to side and align its edge with the paper’s edge.
thermal paper
thermal paper